Home / New Zealand guides / Outage operations / Controlled shutdown: Home office
New Zealand planning guidance for a specific property and load boundary. Save work before trying to extend a work session. H2OME remains in early development.
Define what must happen before useful energy runs out. Computers may need data saved, pumps may need a provider-approved stop sequence and people may need time to leave safely. Shutdown energy is a small but deliberate part of the load budget, not something to discover at the last alarm.
Only use operating procedures supplied by the equipment provider and the responsible professionals. Users should not isolate, vent, bypass protection or restart hydrogen equipment based on a web article. A fault stop and a planned electrical shutdown can require different responses.
Printers, spare monitors and workshop tools should not displace household refrigeration or a shutdown reserve.
Keeping a computer on is different from keeping work available. The internet provider, mobile network, authentication services and remote servers can fail even if the office socket remains energised.
In a home office, nominate the person who protects the separate 0.0375 kWh records-closing allowance. Identify which of the base tasks can stop before that point, and which must follow provider-approved procedures instead of an ordinary user shutdown.
Save work before trying to extend a work session. Business continuity includes data protection and communications alternatives. A proposed home energy system is not a guarantee of internet uptime or uninterrupted computing.
All numbers below are hypothetical teaching inputs, not measured appliance specifications or product performance. The topic-specific extra load is separate from the base set; omit it if your real inventory already counts it. This worksheet does not include conversion overhead, protection design or a contingency allowance.
For a home office, assume the selected base loads average 0.235 kW for 4 hours: 0.235 × 4 = 0.94 kWh. Separately, a separate device used for closing records draws an assumed 150 W for 0.25 hours: (150 ÷ 1,000) × 0.25 = 0.0375 kWh. The combined illustrative demand is 0.9775 kWh.
Fifteen minutes is 0.25 hour; this reserve should remain available before discretionary work continues.
For arithmetic only, if the complete storage chain had a hypothetical 30% round-trip efficiency, delivering 0.9775 kWh would require 0.9775 ÷ 0.30 = 3.2583 kWh of charging input. This is not a measured H2OME efficiency or recovery result. Ongoing demand during charging would add to the required input.
Base operating window: 4 hours. Extra illustrative load: A separate device used for closing records, 150 W for 0.25 hours. Replace every input with a measured or professionally established value.
In New Zealand, discuss supply arrangements and connection questions with your electricity retailer and distributor. Ask the local council about relevant siting, building and water-use requirements. Use appropriately qualified electrical and hydrogen professionals, and refer workplace safety questions to WorkSafe guidance. This page does not establish a consent or compliance outcome.
For medically dependent people in New Zealand, register with your electricity retailer, the company that bills you, and keep that registration current. Re-register when switching retailers; ask the retailer how the distributor is informed and what clinical confirmation is needed. Follow the clinician and equipment provider's contingency plan. Registration does not guarantee uninterrupted electricity, and H2OME is not a substitute for that plan.
H2OME is in early development. Its 10 kW output figure is a design target, not a proven specification. There is no confirmed price, certification, commercial availability or guaranteed runtime in this guide.
Hydrogen is an energy store, not free energy. Grid input, wind and micro-hydro are the charging options considered here. Each requires its own supply assessment. Do not install hydrogen equipment, modify fixed wiring, bypass protection or improvise a connection from this guide.
These official resources provide energy, consumer and technical background. They are not endorsements of H2OME, proof of its performance or a substitute for site-specific professional advice.
Keeping a computer on is different from keeping work available. The internet provider, mobile network, authentication services and remote servers can fail even if the office socket remains energised. Save work before trying to extend a work session.
No. The 0.9775 kWh total is an illustrative demand worksheet, not a runtime result. Actual appliance measurements, usable storage output, starting demand, conversion overhead and reserve limits are needed. The 10 kW design target is not demonstrated output capability.
In New Zealand, discuss supply arrangements and connection questions with your electricity retailer and distributor. Ask the local council about relevant siting, building and water-use requirements. Use appropriately qualified electrical and hydrogen professionals, and refer workplace safety questions to WorkSafe guidance. This page does not establish a consent or compliance outcome. Use the worksheet to brief the relevant professionals, not to install, modify or operate hydrogen equipment.
Ask us about H2OME, tell us about your property or register your interest in the proposed system. We are in early development. No payment or purchase commitment; contacting us does not guarantee a pilot installation.