Home / New Zealand guides / Evidence and maintenance / Reading performance evidence: Small business premises
New Zealand planning guidance for a specific property and load boundary. Record faults and service actions for the responsible operator. H2OME remains in early development.
Useful performance evidence names the equipment configuration, load profile, input energy, usable output and operating conditions. A short bench test may support one engineering question while leaving long-duration operation, real motor starts or site integration unanswered.
Do not extend a result beyond its tested boundary. Request repeated measurements, stated uncertainty where available and a record of faults or exclusions. Marketing diagrams and design targets should remain clearly separate from demonstrated performance.
Process equipment, large refrigeration, compressors and all-day trading should not be implied by a small essential-load calculation.
A shop or service office needs to distinguish safe closure from continued trading. Refrigeration, transaction equipment and security have different consequences, and a powered till does not ensure payment networks work.
For small business premises, ask how closely a reported test resembles the 6-hour base window, appliance mix and extra demonstration load. A brief result with a different duty cycle does not validate this property's 3.66 kWh schedule.
Record faults and service actions for the responsible operator. Any food, workplace or regulated service obligation needs its own contingency assessment. A development-stage product is not evidence that a business can continue trading safely.
All numbers below are hypothetical teaching inputs, not measured appliance specifications or product performance. The topic-specific extra load is separate from the base set; omit it if your real inventory already counts it. This worksheet does not include conversion overhead, protection design or a contingency allowance.
For small business premises, assume the selected base loads average 0.46 kW for 6 hours: 0.46 × 6 = 2.76 kWh. Separately, an additional demonstration appliance draws an assumed 450 W for 2 hours: (450 ÷ 1,000) × 2 = 0.9 kWh. The combined illustrative demand is 3.66 kWh.
A successful energy delivery for this appliance is one result, not proof of whole-property capability.
For arithmetic only, if the complete storage chain had a hypothetical 30% round-trip efficiency, delivering 3.66 kWh would require 3.66 ÷ 0.30 = 12.2 kWh of charging input. This is not a measured H2OME efficiency or recovery result. Ongoing demand during charging would add to the required input.
Base operating window: 6 hours. Extra illustrative load: An additional demonstration appliance, 450 W for 2 hours. Replace every input with a measured or professionally established value.
In New Zealand, discuss supply arrangements and connection questions with your electricity retailer and distributor. Ask the local council about relevant siting, building and water-use requirements. Use appropriately qualified electrical and hydrogen professionals, and refer workplace safety questions to WorkSafe guidance. This page does not establish a consent or compliance outcome.
For medically dependent people in New Zealand, register with your electricity retailer, the company that bills you, and keep that registration current. Re-register when switching retailers; ask the retailer how the distributor is informed and what clinical confirmation is needed. Follow the clinician and equipment provider's contingency plan. Registration does not guarantee uninterrupted electricity, and H2OME is not a substitute for that plan.
H2OME is in early development. Its 10 kW output figure is a design target, not a proven specification. There is no confirmed price, certification, commercial availability or guaranteed runtime in this guide.
Hydrogen is an energy store, not free energy. Grid input, wind and micro-hydro are the charging options considered here. Each requires its own supply assessment. Do not install hydrogen equipment, modify fixed wiring, bypass protection or improvise a connection from this guide.
These official resources provide energy, consumer and technical background. They are not endorsements of H2OME, proof of its performance or a substitute for site-specific professional advice.
A shop or service office needs to distinguish safe closure from continued trading. Refrigeration, transaction equipment and security have different consequences, and a powered till does not ensure payment networks work. Record faults and service actions for the responsible operator.
No. The 3.66 kWh total is an illustrative demand worksheet, not a runtime result. Actual appliance measurements, usable storage output, starting demand, conversion overhead and reserve limits are needed. The 10 kW design target is not demonstrated output capability.
In New Zealand, discuss supply arrangements and connection questions with your electricity retailer and distributor. Ask the local council about relevant siting, building and water-use requirements. Use appropriately qualified electrical and hydrogen professionals, and refer workplace safety questions to WorkSafe guidance. This page does not establish a consent or compliance outcome. Use the worksheet to brief the relevant professionals, not to install, modify or operate hydrogen equipment.
Ask us about H2OME, tell us about your property or register your interest in the proposed system. We are in early development. No payment or purchase commitment; contacting us does not guarantee a pilot installation.